- News
- Buy it
- HA Interface
- How-To
- ⭐️Quick Start: Use sensor hotspots to configure the network and connect to HA.
- Advanced tools: Use Firmware And Config Tool
- Documentation
- SPS30 Specification
News
Title | Date |
|---|---|
Jul 29, 2025 11:51 PM | |
Jul 17, 2025 12:14 AM | |
Jul 15, 2025 2:04 PM | |
Jul 15, 2025 10:04 AM | |
Jul 15, 2025 2:08 AM | |
Jul 14, 2025 1:23 PM | |
Jul 14, 2025 1:21 PM | |
Jul 12, 2025 1:06 PM | |
Jul 12, 2025 1:06 PM |
Buy it
https://store.screek.io/products/pm25-1
HA Interface
How-To
⭐️Quick Start: Use sensor hotspots to configure the network and connect to HA.
This is one of the simplest ways to configure the network. All you need to do is connect to the sensor's hotspot PM25-SENSOR-PM25-1, and the configuration page will pop up (if it doesn't, please open the browser page http://192.168.4.1). Enter the Wi-Fi information on the page, and the device will automatically connect to the network.
The device should be automatically detected in HA.
Advanced tools: Use Firmware And Config Tool
If your sensor is not functioning properly or has been flashed with the wrong firmware, you need to restore it to its factory settings. You can use a convenient online tool to do this. The online tool can also be used to view device logs, configure Wi-Fi networks, and perform other functions.
https://tool.screek.io/factory_tool/pm25_1
- Video Demo: how to use the online tool to repair the PM25_1 firmware.
- Demo: Connect to Wi-Fi and add automatically detected devices in HA.
- Demo: Check Device Runtime Log
Documentation
SPS30 Specification
